Toshiba 32AV500A - Manual (Page 21)

21
Using the TV’s features (General)
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analog only -
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
Press , then press
Y
or
Z to display the SOUND menu
then press .
Press
V or U to select MTS, then press and Y
or
Z
to select Auto or Mono.
ATV Menu...[SOUND...MTS]
MTS
Dual
Selectable Sound
Bass Boost
EXIT OK Confirm Navigate Cancel
MONO
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch to Mono (monaural) ( page 22).
Selecting the dual 1 or dual 2 mode
- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
Press , then press
Y
or
Z to display the SOUND menu
then press .
Press V or U to select Dual, then press and Y or Z
to select Dual 1 or Dual 2.
ATV Menu...[SOUND...Dual]
MTS
Dual
Selectable Sound
Bass Boost
EXIT OK Confirm Navigate Cancel
Dual 1
Notes:
When the MTS setting is in Mono mode, the Dual menu is
not selectable.
The Dual menu setting status remains even if the TV is
turned off.
1
2
1
2
•
•
Selecting the stereo programs
- analog only -
When a stereo program is received, Stereo appears.
Press to select the Auto/Mono mode. Auto and Mono
appear cyclically on the screen.
Selecting the bilingual programs
- analog only -
When a bilingual program is received, Dual appears.
Press to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
Dual 1 Sub I sound Main sound
Dual 2 Sub II sound Sub sound
Mono Main sound ---
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
Press , then press
Y
or
Z to display the SOUND menu
then press .
Press V or U to select Selectable Sound, then press
and
Y
or
Z to select Standard, Movie, Music and
User.
DTV Menu...[SOUND...Selectable Sound]
Selectable Sound
Treble Setting
Selectable Sound
Bass Boost
User
6
EXIT OK MENU Confirm Return Navigate Cancel
Balance Setting
Bass Setting
0
10
In User item , you can press
V or U to select an item
you want to adjust, press
Y
or
Z to adjust the settings as
required.
Whe you select Standard, Movie or Music, the setting
was fixed and can’t adjust.
Selection Y Pressing Z
Bass weaker stronger
Treble weaker stronger
Balance
decreases the right
channel decreases the left
channel
1
2
1
2
1
2
3