Tech4o Altimeter Watch - Manual (Page 7)

12 13
proceed to the next available stopwatch to begin recording
another set of times following the steps above. [ Note that there
are 5 available stopwatches]. More stopwatch information can
be recorded by clearing stopwatch data in the stopwatch history
mode or by recording over stopwatch #5.
6.0 Stopwatch History Mode - Display
The Stopwatch History mode allows you to
access and view data at the end of an event.
• To access the stopwatch history mode,
press the [o/-] button 4 times while in time/
date mode.
• When the stopwatch history mode is
selected the watch will display St HSt on
the top row and either the current home
time, or temperature depending on your selection .
6.1 Stopwatch History Mode - Navigating Saved Data
How to retrieve saved stopwatch information:
• To view saved stopwatch information, press the [o/o] button
in stopwatch history mode to view the desired history log
[St1, St2…].
• Press the [o/-] button to confirm and view the desired data.
• Continue pressing the [o/-] button to scroll through the
different lap/int times for that stopwatch log.
• Press the [o/o] button any time to view a different stopwatch
log.
• To clear all saved stopwatch data, press and hold the [s/+]
button while selecting a stopwatch log to view.
7.0 Alternate Time Zone Mode - Display
• To view the alternate time zone
display, press the [o/-] button 5 times
while in time/date mode.
• When the alternate time zone mode
is selected the watch will display the
alternate time zone time in the top row
and the home time in the bottom row.