Tut Systems XL-12000B - Manual (Page 18)

XL-12000B
HIGH-SPEED NETWORK MODEM
14 TUT SYSTEMS APPENDIX A: PINOUT ASSIGNMENTS
Appendix A: Pinout Assignments
Table A.1. RJ-45 10Base-T Ethernet Connector on Rear of Modem
Pin # Mnemonic Function
1 Tx+ 10Base-T differential transmit signal (+)
2 Tx- 10Base-T differential transmit signal (-)
3 Rx+ 10Base-T differential receive signal (+)
4 NC Unused
5 NC Unused
6 Rx- 10Base-T differential receive signal (-)
7 NC Unused
8 NC Unused
Note: Assumes the switch on the rear of the unit is in the “Normal” position.
Table A.2. RJ-11 DSL Line Connector on Rear of Modem
6-pin connector 4-pin connector
Pin # Mnemonic Function Pin # Mnemonic Function
1 NC Unused 1 NC Unused
2 NC Unused 2 TIP DSL (+)
3 TIP DSL (+) 3 RING DSL (-)
4 RING DSL (-) 4 NC Unused
5 NC Unused
6 NC Unused