Transcend Information USB JetFlash - Manual (Page 16)

13
LED Indication
Record LED
(Red)
Power/Play LED
(Green)
Repeat LED
(Orange)
Status
off off off Power off
off fast blink off Data transfer
off on off Power on (in MP3 mode)
off normal blink off Play MP3 music
off normal blink on Repeat a track
off normal blink normal blink Repeat all tracks
off normal blink fast blink
The beginning of the portion you wish to
repeat is marked in MP3 mode
off normal blink slow blink Repeat a portion of one track
on on off In Record mode
normal blink off off Record voice
on normal blink off Play the recorded file(s)
on normal blink on Repeat a recorded file
on normal blink normal blink Repeat all recorded files
on normal blink fast blink
The beginning of the portion you wish to
repeat is marked in Record mode
on normal blink slow blink Repeat a portion of one recorded file
Recover JetFlash
If your JetFlash is ever damaged, you can use the Recovery program to restore its
default settings.
™ Running the Recovery program will erase all the data on the JetFlash.
™ If there are bad blocks in the flash memory chip of JetFlash, the memory size of
JetFlash after running the Recovery program will be smaller than the original
memory size.
To Recover JetFlash in Windows 98SE
1. Put the Driver CD into the CD-ROM (Auto-Run supported).
2. Remove the battery from JetFlash.
3. Press and hold the PLAY/PAUSE
button, then plug JetFlash into an available
USB port.