Transcend Information USB JetFlash - Manual (Page 13)

10
Repeat All Tracks
Press the Track Control Wheel when the Repeat LED is on, or press the Track
Control Wheel twice when the Repeat LED is off. The Repeat LED blinks
orange.
™ To resume normal playback, press the Track Control Wheel again.
Repeat a Portion of One Track (AB Repeat)
1. Press the Volume Control Wheel to mark the beginning of the portion you
wish to repeat. The Repeat LED blinks orange.
2. Press the Volume Control Wheel again to mark the end of the portion you
wish to repeat. The Repeat LED blinks orange at a slow speed, and the marked
portion is played as a continuous loop.
Hold
When the HOLD switch is set to the “ON” position, all the buttons and control
wheels are disabled. To enable the buttons and control wheels, the HOLD switch
must be set to “OFF”.
™ If the HOLD switch is set to “ON”, all LEDs will blink twice when you power on
the JetFlash.
MP3 Function
To Download or Upload MP3/WMA files
1. Complete the driver installation.
2. Plug JetFlash into an available USB port. A new Removable Disk drive with a newly
assigned drive letter appears in the My Computer window. You can now download or
upload MP3/WMA files from or to your computer by clicking and dragging the file
names/icons to the desired directories.
™ In order to be able to play MP3 or WMA files, you must store them in the root directory
of JetFlash.
™ JetFlash only supports Mpeg I Layer 3 and WMA files compressed at a rate of 32
Kbps–320Kbps.