Tekkeon MP3400 User Manual

Page 8

2. With the voltage lock in the unlocked position (switched right to VOLTAGE), set the voltage output

to the voltage selection that is equal to or one increment higher than the voltage identified for
your device. To do this, press the voltage selector until the voltage indicator turns on under the
appropriate voltage selection (3, 4.5, 5, 6, 7.5, 9, 12, 14 for MP3300 and 5, 6, 7.5, 9, 12, 14, 16, 19
for MP3400). For example, if your device requires 6V, set the voltage to 6. If your device requires
7.2V, set the voltage to 7.5.

It is important to set the voltage selector NO MORE than one step higher than the voltage requirement
for the portable device as an incorrect setting may prevent myPower ALL from working with your
device, or may harm your device in the rare instance that the device accepts the higher voltage.
However, for all devices, adjusting the voltage ONLY one step higher than required will not harm the
device.

The following table provides recommended voltage settings by device type.

Device Type

Voltage on Device

Suggested Voltage on

Power Adapter

myPower ALL

Notebook Computers

14V 12V
16V

14V

19V

14 - 16V

24V

19V

Portable DVD Players

9V 7.5

12V

9 - 12V

Digital Cameras

5 - 6V

CD Players

4.5 - 5V

PDAs

Mobile Phones

3.7 - 5V

Camcorders

7.5 - 9V

12V

9 - 12V

MP3/MP4

myPower ALL VOLTAGE SELECTION

mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 6