TRENDnet TK-423K - Manual (Page 7)

Select Audio/MIC
Channel
ScrLk ScrLk + + Fx
Select the active Audio/Mic
channel - - -
Command Hot-Keys Description
Front-Panel
Buttons
Quick Reference Sheet for TK-423
Select PC
Next lower channel
Autoscan
Next higher channel
Autoscan with
Programmable
Delay Time
Autoscan Beep
Sound On/Off
Console Mouse/
Keyboard Reset
Define Hotkey
Sequence
(default = ScrLK +
ScrLK)
Stop Autoscan
ScrLk ScrLk + +
(Arrow up)
ScrLk ScrLk + +
(Arrow down)
ScrLk ScrLk + + B
ScrLk ScrLk + + END
ScrLk ScrLk + + S
Press any key on keyboard
Select the active PC channel
Press the Push Button
for a specific port to
switch to that port
Select the next lower PC
connected channel
Autoscan through every
connected channel for quick
screen browsing of each
channel
Select the next higher PC
connected channel
Specify a delay within a range
of 10-100 seconds
Toggle On/Off beep sound
during Autoscan mode.
Reset Mouse/Keyboard on the
console side
Select the hotkey preceding
sequence among 5 options
Stop Autoscan activity
Press any button
or key
- - -
- - -
Unbind PC and
Audio/Mic Switching
ScrLk ScrLk + + W
Disable the binding of PC and
Audio/Mic switching. - - -
- - -
ScrLk ScrLk X + +
Y = Scroll Lock, Caps Lock, Esc, F12 or
Num Lock
ScrLk ScrLk H Y + + +
English
5
Note:
If you have defined a different hotkey preceding sequence key (e.g. Caps Lock, Esc, F12), press that button instead
of scroll lock. For example, if you want to turn off activate autoscan and have defined the hotkey preceding sequence key as
F12, press F12 + F12 + S.
Press the Push Button
for a specific port to
switch to that port
Press the Push Button
for a specific port to
switch to that port
Y
Press and hold down
button 4 for over 8
seconds, then release
the button and press
the key.
Y = Scroll Lock, Caps
Lock, Esc, F12 or
Num Lock
Press any push
button
Previous channel
Toggle between the previous
channel and current channel. - - -
ScrLk ScrLk + + Backspace
Bind PC and
Audio/Mic Switching
ScrLk ScrLk + + Q
Enable the binding of PC port
and Audio/Mic port switching.
(Once this feature is enabled,
PC and Audio/Mic switching is
bound together. This feature is
enabled by default.
- - -
(X) = 0~9
1 = 10 seconds
2 = 20 seconds
3 = 30 seconds
4 = 40 seconds
5 = 50 seconds
ScrLk ScrLk S X + + +
6 = 60 seconds
7 = 70 seconds
8 = 80 seconds
9 = 90 seconds
0 = 100 seconds