Texas Instruments TUSB3410 - Manual (Page 9)

1-1 Required Hardware and Software
Required Hardware and Software
The TUSB3410 general-purpose input-output EVM was designed for use with
a personal computer running a USB-enabled operating system. The PC
should be USB 1.1 or USB 2.0 spec compliant. This implies the BIOS, chip-
sets, and operating system are all spec compliant. If the BIOS is not spec com-
pliant, the system may not boot when USB devices are connected at power
up and the EVM may not function. Note that the EVM can only function in the
bus-powered mode.
Topic Page
1.1 Hardware Items 1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Hardware Overview 1-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1