beautypg.com

Positioning the bowl, Steaming, Before you use your appliance for the first time – Groupe SEB USA - T-FAL Steamer Blender User Manual

Page 20: Using the steaming function, Use positioning the lid

background image

22

Positioning the bowl

Once the lid is locked on, place the bowl on the body of the appliance and
turn it until it locks into position

-

fig. 4/5

.

Note: the appliance will
not work if the bowl is
not properly locked in
position.

Steaming

Cooking time varies according to the temperature of the food and
evaporation of the water poured into the tank before start-up.
The cooking times in the guide opposite are given as an indication only
for approximately 100 g of food, either fresh or frozen, cut up into small
cubes or pieces.

Note: if the food is not
cooked enough, wait
10 minutes before opening
the plug on the tank.
Fill it up again and do
another cycle, adjusting
the amount of water.

Before you use your appliance for the first time

Before you use your appliance for the first time, we advise you to carry out a steaming cycle using

4

measures of water.

Then wash the bowl, basket, lid, blade and accessories in dishwater. Clean the body of the appliance with a
soft cloth. To remove the blade, turn the knob

-

fig. 1

until the upper and lower parts of the blade are free.

Using the steaming function

Open the plug on the water tank and pour in the amount of water indicated
for cooking the food using the water measure

-

fig. 6

. Put the plug back in.

Place the food in the steaming basket then place the basket in the bowl,
in the notch designed for this purpose

-

fig. 7

Close the lid, making sure

it is locked in position

-

fig. 2/3

. Then place the bowl on the body of the

appliance

-

fig. 4/5

and turn the button to the steaming position

.

The indicator light comes on and the button returns to the position.

The appliance starts to heat up and stops automatically when the water
tank is empty.

Caution: on first use,
the steam function may
already be selected. Thus,
the tank must always be
filled before you plug in
the appliance.

Use

Positioning the lid

To lock the lid, position it on the bowl with the marks lined up then
turn it anticlockwise

-

fig. 2/3

.

Note: the lid cannot be
removed once the bowl is
locked onto the body of
the appliance.

211427 Not Mix-Cuis.indd 18

211427 Not Mix-Cuis.indd 18

31/05/07 14:22:08

31/05/07 14:22:08