Techno Source Rubik's Revolution 3000 User Manual
Techno Source Consoles
LIGHT SPEED™ (BLUE)
Light Speed is the lightning-fast game that’ll push your skills to
the limit! Turn the lights off by quickly tapping them to increase
the challenge and rack up your score!
1. Press the
BLUE light to activate LIGHT SPEED from the
main menu.
2. A light will turn on and the
Revolution begins to tick. Tap
the light and a positive DING! will play, while another light
turns on.
3. Earn points by quickly turning off the lights. Miss and a BUZZ
will sound.
4. At the end of the game, the Cube will announce your score and
then return to the main menu.
PATTERN PANIC™ (GREEN)
Match wits with the
Rubik’s Revolution in Pattern Panic!
Memorize the growing sequence and rapidly repeat it to conquer
the Cube!
1. Press the
GREEN light to activate PATTERN PANIC from
the main menu.
2. To begin the game, the Cube will announce a color and the
light will briefly turn on.
3. Press the correct light to continue the game. The Cube will
repeat the first color and add another one to the sequence.
4. If you press an incorrect light, a BUZZ will sound, the Cube
will announce your score, and then return to the main menu.
5. Memorize and repeat the growing pattern to unlock new levels!
MULTIPLAYER MADNESS™ (RED)
Challenge your friends in Multiplayer Madness! As the game
gets faster and faster, turn the light off and pass the Cube before
time runs out! WINNER TAKES ALL!
1. Press the
RED light to activate MULTIPLAYER MADNESS
from the main menu.
2. The
Revolution will ask how many players want to join in the
game. Press the color that corresponds to the correct number of
players.
3. A light will turn on and the
Revolution begins to tick. If you tap
the light, a positive DING! will play and the Cube will direct
the player to PASS THE CUBE to the next player.
4. In turn, the next player will have to search for the lit light and
turn it off before passing the Cube to the next player in the game.
5. The players will continue to pass the
Revolution until a player
either taps the wrong light or does not hit the correct one in
time. A BUZZ will sound and the Cube will announce that the
player is out of the game.
6. The eliminated player will give the Cube to the next player in
the circle and the next round will begin.
7. The last player left at the end of the game is the winner!
RAPID RECHARGE™ (YELLOW)
Rapid Recharge challenges you to fully light up the Cube as
quickly as possible! It may sound easy, but can you charge up
all the lights before any fade out?
1. Press the
YELLOW light to activate RAPID RECHARGE
from the main menu.
2. Two BEEPS will play and one light will turn on to start the
game.
3. The light will begin to fade. Press it repeatedly to charge it up.
The Cube will say the color while it is charging and
CHARGED when the light is at full power.
4. Watch the other sides! The other lights will turn on and begin
to fade, too. If a light is about to fade out, the Cube will say
WARNING repeatedly.
5. If a light turns off, a BUZZ will sound and the Cube will
return to the main menu.
6. Fully charge all six sides at the same time to win! The
Revolution will announce the elapsed time and then return to
the main menu.
CUBE CATCHER™ (SILVER)
Cube Catcher is a pressure-packed race against the clock with a
frenzy of lights! The more lights you turn off, the better your
score, but be careful not to hit the unlit sides!
1. Press the
SILVER light to activate CUBE CATCHER from
the main menu.
2. Two BEEPS will play and multiple lights will turn on to start
the game.
3. Try to turn off as many lights as you can in 30 seconds! Each
tapped light will play a positive DING!, while pressing an unlit
side will make the Cube BUZZ.
4. At the end of the round, the Cube will announce your accuracy
percentage. Score above 70% to unlock new levels!
5. If you get less than 70% correct, the Cube will say
TRY AGAIN and then return to the main menu.
CODE CRACKER™ (ORANGE)
Hey supersleuth, can you crack the secret code? Using logic and
reason, figure out the correct color sequence in the shortest time
and fewest turns as possible.
1. Press the
ORANGE light to activate CODE CRACKER from
the main menu.
2. Two BEEPS will play to begin the game.
3. To find the first color in the code, press one of the six lights.
A DING! will play if it is correct, or a BUZZ will sound if it
is not the first color in the sequence.
4. If you pressed the correct color, tap one of the remaining
lights to find the next color in the code. If the next color is
incorrect, all of the lights will turn off and you will have to
reenter the correct lights in the code to continue.
5. Turn on all of the lights as quickly as possible in the
correct sequence to crack the code! The
Revolution will
announce your elapsed time and the amount of turns needed
to beat the game.
6. The Cube will then return to the main menu.