Telenetics MIU14.4 - Manual (Page 20)

MIU Installation, Operation & Diagnostics Edition: March 30, 1998 Page 18
15. DIAGNOSTICS
The following pages provide software and hardware techniques for
diagnosing communication problems and thereby isolating the problem at
either the local modem, the remote modem or the interconnecting line.
The following AT&Tn commands form part of the CCITT V.54 protocol
and can be used for diagnostic testing.
Note: &Tn commands can only be used when the modem is configured
for &Q0 (unbuffered/direct asynchronous mode).