Thermador VTR630D - Manual (Page 5)

PAGE 3
INSTALLATION
1. Hold the fan on the wall.
Note the direction of the air conduction.
2. Mark the 4 mounting boreholes.
ṇ
At least one screw must be installed through a stud.
ṇ
The wall plugs must be suitable for the brickwork.
ṇ
Air outlet downwards.
3. Wall break:
Mark and drill a guide hole and a seperate hole for
electrical conduit.
4. Drill the 4 x 1 /
4
” l mounting boreholes.
Insert wall plugs and screw the fan to the wall.
5. Connect the pipe from the fan to the extractor hood and
feed to the outside.