Off-hook call announce, Override calls, Busy override – Toshiba STRATA CTX DKT2004-CT User Manual
Page 57: Off-hook call announce override calls
Features
Off-hook Call Announce
Strata DKT2004-CT Cordless Digital Telephone 10/02
45
Off-hook Call Announce
Off-hook Call Announce (OCA) enables you to complete a call to a busy digital
telephone. Your telephone must be programmed to either announce automatically or to
announce after you press a button on your dial pad. The destination telephone must be
programmed to accept an OCA. The announcement may be delivered over the handset
or the speaker.
Handset OCA can operate on any digital telephone. Speaker OCA requires the
addition of a special circuit board inside the DKT speakerphone.
➤
To make an OCA call
➤
Manual – Dial an extension. When you hear busy tone, press
and, after one long
tone, you can talk through the speaker of the destination telephone. The person you
are calling has answering options described below.
➤
Automatic – If your telephone and the extension you are calling have been
programmed for Automatic OCA, you can talk through the speaker of the
destination telephone without hearing the busy tone and without dialing
.
Override Calls
The available override features are:
Busy Override
Ring Over Busy Override enables you to send a muted ring tone to a busy station to
indicate a call is waiting. The Busy Override (BOV) muted ring can be programmed
for each station to be two muted rings only or continued muted rings until the call is
answered. This option applies to the station receiving the muted ring. The muted ring
can be sent to the telephone speaker or to the telephone handset/headset and speaker.
➤
To use Busy Override
➤
After reaching a busy station, press
. A muted tone is heard at the busy station,
indicating that a call is waiting. The station number displays.