Operational overview – Tannoy TS8 User Manual
Page 9
OPERATIONAL OVERVIEW
5
Technical Specification
TS8
TS10
Output Power
200W RMS
300W RMS
Low Frequency Response (-6dB)
32Hz
29Hz
Limit for usable output
18Hz
16Hz
Inputs
2 x line level phono
2 x line level phono
2 x XLR balanced
2 x XLR balanced
Outputs
2 x XLR balanced
2 x XLR balanced
(direct or 80Hz HIPASS)
(direct or 80Hz HIPASS)
Input Filter
2
nd
order low pass,
2
nd
order low pass,
50Hz – 150Hz, -6dB.
50Hz – 150Hz, -6dB.
Auto Mute
After approximately 12 mins, After approximately 12 mins,
in absence of input signal
in absence of input signal
Driver Type
200mm (8”)
250mm (10”)
Enclosure Type
Closed box
Closed box
Enclosure Volume
12.5 litre/ 0.45cu.ft
16.75 litre/ 0.6cu.ft
Additional Features
Phase control
Phase control
Crossover defeat switch
Crossover defeat switch
for LFE operation
for LFE operation
Soft limiting to avoid overload Soft limiting to avoid overload
LF extension control
LF extension control
Enclosure (H x W x D)
292 x 280 x 255mm
323 x 286 x 286mm
Including feet
11.5” x 11.5” x 10”
12.7” x 11.3” x 11.3”
Enclosure Weight
7.0kg/ 15.4lbs
9.5kg/ 21lbs
Mains Voltage
120V nominal AC ~, 60Hz
230V nominal AC ~, 50Hz
Mains Fuse
120V- T2AL/250V
120V - T3.15AL/250V
230V- T1AL/250V
230V - T1.6AL/250V
Maximum Power Consumption
275VA
416VA
Warranty
Tannoy adopts a policy of continuous improvement and product specification is subject to change.
E. & O.E.
This equipment has undergone safety and EMC testing, and complies with the European Low Voltage
Directive and Electromagnetic Compatibility Directive, together with the requirements of the Canadian
Standards Association (CSA).
10