TRENDnet TEG-S4000 - Manual (Page 20)

Chapter 3 Installation
The Switch can be installed quickly and easily.
However, for an installation with minimum impact on
the existing network, please read this chapter
carefully.
Installing a 4-Slot Modular Switch involves three steps:
1. Choosing a location
2. Supplying power
3. Connecting the switch
Choosing A Location
The location of the switch is based on the following
criteria:
Avoid dusty locations.
Avoid electromagnetic noisy areas, such as locations
close to power transformers or radio transmitters.
Avoid temperatures below 32 Degrees Fahrenheit
and over 122 Degrees Fahrenheit.
Allow a clear view of the front panel LED indicators.
Allow easy access to the front panel ports and the
rear panel switches.
After choosing an appropriate location, you can install
the switch on a desktop or in a rack.
Figure 3-1. Attaching self-adhesive feet for desktop
installation