Erasing a cd-rw, Data cd performance, Importing and exporting tracks – Tascam DP-02 User Manual
Page 69: Importing from a cd, Data cd performance importing and exporting tracks, Important safety instructions, 4 – dp-02 appendix
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF
4 – DP-02 Appendix
To erase a CD-RW disc so that you can reuse it:
1. Press and hold the
SHIFT
key and press the
ERASE
key.
The following confirmation message is displayed.
2. Press the
YES/ENTER
key to erase the CD-RW.
NOTE
Only CD-RWs can be erased. A CD-R cannot be erased.
Erasing a CD-RW
Data CD performance
Between a CD and the DP-02’s song tracks, you can import
and export individual tracks to and from. The files used
for track import and export are 16-bit 44.1kHz mono WAV
format (and must have the .WAV extension).
Audio in other formats intended for import must be
converted before the import operation.
Importing and exporting tracks
You can read WAV-format files recorded on data CDs and
import these files to tracks of the currently-loaded song.
1. Insert a CD containing WAV format files into the
slot.
2. Press the
CD
key to bring up the
CD
menu and select
the
CD IMPORT
action. The names of any WAV
format files on the CD are displayed:
NOTE
Only 16-bit, 44.1 kHz monaural WAV format files can
be handled in import and export operations. (The file-
names that are not in this format are not displayed.)
3. Select a WAV file to import using the
DATA
dial and
press the
YES/ENTER
key.
4. Select the import destination track of the WAV file
using the
DATA
dial and press the
YES/ENTER
key.
After the file is imported from the CD, the display
returns to the CD menu screen.
Importing from a CD