Triax SR 322 - Manual (Page 6)

1. LNB
Input connection from the LNB.
2. LOOP THROUGH
Used to connect between the Loopthrough Output of
LNB A to the Input of LNB B when using a single,
fixed satellite feed or Motorised system.
3. RS-232
To connect to a personal computer for software
upgrade.
4. ANT IN
To connect to television antenna.
5. TV OUT
To connect a TV via a coaxial cable.
6. S/PDIF(Coaxial/Optical)
To connect a digital amplifier output.
7. VIDEO
Video connection port to the TV or
other equipment.
8. AUDIO
Audio connection port to the TV or
other equipment.
9. USB port
To connect the USB cable to the PC.
10. SCART for VCR
Connect this port to the VCR via SCART cable.
11. SCART for TV
Connect this port to the TV via SCART cable.
12. S-VHS
Video connection port to a TV or other equipment via
super video.
13. POWER Switch
Provide power to the main unit.
14. POWER Supply
90 ~ 250V AC, 50/60Hz.
1.3 Rear Panel
1 1 4 6 7 10 13
11 8
14 12 9
5
3
2 2
Note
The design of the Front/Rear Panel may be changed without any notice in advance.
6
1. STAND BY(POWER)
Switch the receiver power "ON" or "OFF".
2. MENU
To see main menu.
3. VOL -/+
To turn the volume -/+ or select a
sub-menu item.
4. OK
To select a program, a highlighted line or
parameter value.
5. CH -/ + ( Program Ÿ / ź )
Channel -/+ or select item of sub-menu.
6. EXIT
Exit from parameter and cancel selected function.
7. Smartcard Slot
1 Slot for smart card.
8. Cam Slot (Option)
2 Slot for Common Interface CAM with smart card.
8 1 7 2 3 3 5 5 4 6
1.2 Front Panel