1 basic function usage – Triax SR 322 User Manual

Page 16

3.1 Basic Function Usage

3.1.11 To change the audio output

• Press the

A.L/R

button on the remote control unit to change the

output.

• Then on-screen menu is displayed on the top right side of the screen.

• Press the

A.L/R

button repeatedly to change the sound mode.

(Mono, Left, Right, Stereo)

3.1.12 PIP

The PIP (Picture-in-Picture) function allows you to watch two screens
at the same time. With the PIP function, you can move the PIP screen
or freely adjust the screen size.

• If you press the

PIP

button while the channel is showing on the

screen, the PIP will be shown at the top left of the screen.

• If you press the

PIP CH

button, the PIP Simple Channel List will

appear on the screen.

• Press the

UP/DOWN

button on the PIP Simple Channel List screen to

select a channel, and press the

button.

• Press the

MODE

button and press the

UP/DOWN/LEFT/RIGHT

button

to change the location of the PIP screen.

• Press the

MODE

button once again and press the the

UP/DOWN

/LEFT/RIGHT

button to change the size of the PIP screen.

• If you press the

MODE

button once again, you can see the screen as

a multi-media window type. The main screen will be displayed on the
left, and the PIP screen on the right side of the screen, as a multi-
media window type.

• Press the

SWAP

button to swap the main screen for the PIP screen,

while the PIP screen is showing.

3.1.13 Recall List

Recall List is to show the previous channels (up to 10 channels).

• If you press the

RECALL

on the screen, the Recall List Pop-up

window will appear.

• Press the

UP/DOWN

button to select the channel and then press the

button. The changed channel will be shown with the channel

banner.

3.1.14 DISPLAY Setting

This mode changes settings such as the TV Type, RF Channel, and
RF Mode.

If you press the

DISPLAY

button, the

A/V Settings

screen of the

System Setting menu will appear. Change the settings on the screen.