Taylor 1507 - Manual (Page 9)

8
Setting the Time & Alarm (continued)
3. Clock & Calendar
Press “CLOCK” on the front of the unit to toggle between time,
calendar and day of the week displays.
The clock may be set to display in 12 or 24 hour format, and the
calendar may be set to display in Month/Day or Day/Month format.
This set up procedure will also allow manual setting of the time and
date:
Press and hold the “CLOCK” button on the front of the unit. The unit
will beep and the time display will show 12H or 24H. Press “p
”or “q “
buttons to select data in the following sequence: 12/24 hour>hour
>minutes>year>Day/Month or Month/Day>month>date. After each
selection press the “CLOCK” button to enter. Press the “CLOCK”
button after the last entry to return to the time display.
4. MOON PHASE
The Moon phase will automatically display according to current calendar.
5. ALARM SETTING
Press and hold "ALARM" on the front of the unit. The alarm time and
an “AL “ icon appear to the right of the alarm display. The hour
digits will flash. Press “p
”or “q “ buttons to change the alarm hour
and then press "ALARM" to confirm the hour. The minutes digits will
flash. Press “p
”or “q “ buttons to change the alarm minutes and then
press “ALARM” to confirm the minutes.
The LCD will return to the clock display and the bell icon ( ) will
indicate that the alarm is enabled.
To disable the alarm: press the “ALARM” button until the bell icon
disappears. Press “CLOCK” to return to the clock display.
6. SNOOZE / LIGHT
When alarm sounds, press “SNOOZE / LIGHT” on the top of the
receiver to trigger the snooze alarm. A “Zz” icon will appear above
the bell icon. To stop the alarm for one day, press “ALARM” button. To
disable the alarm, press the “ALARM” button until the bell icon
disappears. Press “CLOCK” to return to the clock display. Press
“SNOOZE / LIGHT” for an extended backlight when the adapter is
not connected.