Toshiba FT-8901 - Manual (Page 14)

14
INSTALLATION
Preparation
SETTING THE DIAL MODE
Depending on your dialing system, set the mode as follows:
1
Press and hold until you hear a confirmation tone.
2
To set the dial mode for pulse dialing, press
. Or to set the dial
mode for tone dialing press .
A confirmation tone sounds to indicate the setting is complete.
Note:
Most phone systems use tone dialing.
TONE/
FLASH
TONE/
FLASH
Before using the handset, make sure to read the following instructions.
FT-8901.qx 1/5/1 11:28 AM Page 14