Maintenance greasing spindle, Tightening spindle bolts – Tiger Products Co., Ltd TS 100A User Manual

Page 80

Text mode
Original mode

Maintenance Section 4-16

MAINTENANCE

GREASING SPINDLE

Locate grease fitting on inside of deck housing. Inject Tiger Spindle Lubricant,

part number 06540000 into spindle housing. Fill with lubricant until lubricant weeps
out of the top spindle seal. Lubricate spindle weekly or every 40 hours of use.

TIGHTENING SPINDLE BOLTS

The spindle mounting bolts should be checked and retorqued daily or every 10

hours of service. Torque the (6) bolts shown below to 331 ft. lbs.