Groupe SEB USA - T-FAL Protect Anti-Calc GV9360 - Manual (Page 10)

31
GB
There is no steam or there is
little steam. The water tank is
empty (red light on). Fill the water tank.
The steam output control dial is
set at minimum. Increase the steam output (control dial on the
control panel).
The soleplate temperature is set to
the maximum. The generator is working but steam is very hot and
dry. As a consequence, it is less visible.
The red “water
tank empty” light is on. The water tank is empty. Fill the water tank.
Steam escapes from anti-
scale valve plug. The anti-scale valve plug has not been
tightened correctly. Tighten the anti-scale valve plug correctly.
The anti-scale valve is damaged Contact an Approved Service Centre to order a new anti-
scale valve.
Steam or water escapes
under the appliance. The generator is faulty. Stop using the generator and contact an Approved
Service Centre.
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
If you have any problems or queries please call our Customer Relations team first for expert help and
advice: 0845 602 1454 - UK
(01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
Notice Protect 17L 1800111440 13/02/08 14:47 Page 31