Topcom Twintalker 1400 - Manual (Page 5)

TOPCOM TWINTALKER 1400 5
TOPCOM TWINTALKER 1400
ENGLISH
8 LOW BATTERY INDICATION
When the battery charge level is low, a beep will be heard every 10 minutes to indicate that the batteries needs to be
replaced.
9 BUTTONS
1. LCD Display
2. UP button
- Increase the speaker volume
- Select the next item in the menu.
3. Microphone
4. DOWN button
- Decrease the speaker volume
- Select the previous item in the menu.
5. Speaker
6. MENU/ON-OFF button
- Turn the power On or Off.
- Enter menu.
7. CALL button
- Transmit a call tone
8. PUSH TO TALK button
- Press To Talk or release to listen
- Confirm a setting in the menu
9. Antenna
10 LCD DISPLAY INFORMATION
10. Channel number/Volume level indication
11. TX frame. Displayed when transmitting
12. Volume icon. Displayed while setting the speaker
Volume.
13. Scan icon. Displayed during the CHANNEL SCAN mode.
11 USING THE TWINTALKER 1400
11.1 TURNING THE UNIT ON/OFF
To turn ON:
•
Press and hold the - button. The unit will “beep” and the LCD display will display the cur-
rent channel.
To switch OFF
•
Press and hold the - button. The unit will “beep” and the LCD display will turn blank.
11.2 ADJUSTING SPEAKER VOLUME.
• Press the - button in stand-by-mode to increase the speaker volume. The volume level
is displayed together with the Volume icon.
• Press the - button to decrease the speaker volume.
11.3 RECEIVING A SIGNAL
The unit is continuously in the RECEIVE mode when the unit is switched ON and not transmitting.
PTT
T winTalker 1400
1
3
2
4
5
9
8
7
6
Display
Dispose of batteries at a designated battery disposal unit and not in the
household waste. Do not short-circuit & dispose of in fire. Remove the
batteries if this device is not going to be used for a long period.
10
12
13
11