1 e ng lis h, Press./ to.select.an.option..press.ok, Osd] select.the.default.on-screen.display.language – Toshiba BDX1100KU User Manual
Page 15

1
E
ng
lis
h
6. Press OK, enter Resolution setting.
..Press.OK,.enter.Resolution.setting..
Choose
Previous
a resolution that fits your TV.
Change will be applied immediately, you have
15s to determine whether to save the setting
or rollback to prior resolution. Better
performance will be provided by a HDMI
connection!
Auto
480I/576I
480P/576P
720P
1080I
1080P
OK
Next
Press./ to.select.an.option..Press.OK.
Select "Yes" or "No" using /.
Note:
-When the player is connected to both VIDEO
OUTPUT jack and HDMI OUTPUT jack, resolution is
set to 720p/1080i/1080p, there will be no video
output through VIDEO OUTPUT jack.
Resolution
Previous
has been changed!
14s
Does everything looks all right with this
resolution? Press Yes if you want to apply it.
Press No to rollback to previous one.
Yes
No
OK
Next
7. Press OK, enter Aspect ratio setting.
..Press.OK,.enter.Aspect.ratio.setting..
Previous
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
OK
Next
Choose
an aspect ratio that fits your TV.
The change will be applied in the next page.
Determine whether to save the setting or
rollback to the previous aspect ratio.
Press./ to.select.an.option..Press.OK.
Setting
Finish
Previous
OK
wizard is complete!
Now press the OK button to finish and return
to the Setup Menu.
8. Press OK to return to [General Setting]
..Press.OK.to.return.to.[General.Setting].
Menu.
• [Upgrade]
For.software.upgrades.to.enhance.
performance,.you.could.select.the.
following.upgrade.method.and.start.to.
upgrade.
{.Disc.}/{SD CARD}.
Upgrade.the.software.from.the.disc.or.
SD.card.
1..Insert.the.disc.or.connect.the.SD.
card which contains the upgrade file
package.
2..Follow.the.instruction.on.the.TV.
screen to confirm upgrade operation.
-.The.system.will.reboot.after.5.seconds..
or.OK.key.is.pressed.
Notes:
- If set [Disc Auto Playback]to [Off], after you insert
the disc that contains the upgraded information
to upgrade system, you have to start upgrade from
this option of SETUP Menu.
- If the upgrade file package did not pass the
verification, error prompt is displayed , check the
package again (such as the package is not complete)
- Make sure the firmware version is not an old
version.
- When you upgrade the system using SD card, you
should make a new folder named UPG_ALL, and
copy the upgrade file into this folder.
• [Disc Auto Upgrade]
Turn.On.or.Off.the.disc.automatic.upgrade.
switching.mode.
{On}. -. Start. upgrading. from. the. insert.
disc.
{Off}.-.Disable.disc.auto.upgrade.mode.
•
[External Memory]
External.Memory.would.be.used.in.BD-
Live.function..When.you.plug.in.the.SD.
card.which.has.at.least.1GB.free.space.to.
play. BD-Live. function,. the. BD. system.
would. make. a. directory. named. BUDA.
automatically.. Information. will. display.
the.Free.size.
1..Press.OK.
2..Follow.the.instruction.on.the.TV.
screen.to.select.{Information}.
System
Screen Save
Off
On
On
On
More...
Language
Disc Auto Playback
Playback
CEC
Security
Disc Auto Upgrade
Network
Load Default
... General Setting ...
RETURN
Return
Information
Free size is : 0MB
Erase
Move cursor key to select menu option
then use “OK” key to select
3.Press OK to select "Erase", the data in
the.BUDA.folder.will.be.cleared.
[Language]
Select the OSD(On-Screen Display), set up
Menu,.Audio,.Subtitle.default.language.for.
the.player.
System
OSD
(QJOLVK
(QJOLVK
(QJOLVK
(QJOLVK
Language
Menu
Playback
Audio
Security
Subtitle
Network
... General Setting ...
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select
•
[OSD]
Select.the.default.on-screen.display.language.