Toshiba bdx5200ku - Manual (Page 10)

10
Introduction
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
* Do not expose the remote sensor of the Blu-ray Disc™
player to a strong light source such as direct sunlight
or other illumination. If you do so, you may not be able
to operate the Blu-ray Disc™ player via the remote
control.
Notes:
• Direct the remote control at the remote sensor of the Blu-ray
Disc™ player.
• When using the remote control, press the buttons at intervals
of about 1 second to ensure the correct mode of operation.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or humid
place.
• Do not spill water or put anything wet on the remote control.
• Do not open the remote control.
• If the remote control is not going to be used for a long time,
remove the battery to avoid damage caused by battery leakage
corrosion.
POWER
GOTO Clear
Distance:
About 5 m from the
front of the remote
sensor.
Angle:
About 30° in each
d i r e c t i o n o f t h e
front of the remote
sensor.