Toshiba B-EV4D SERIES - Manual (Page 30)

3. MAINTENANCE ENGLISH VERSION EO1-33088
3.1 Cleaning
E3- 2
3.1.2 Platen/Sensors
3.1.3 Cover
3.1.4 Media Housing
1. Wipe the Platen with a soft cloth moistened with absolute ethyl
alcohol.
2. Remove dust or paper particles from wipe the Black Mark Sensor,
Feed Gap Sensor, and Cover Open Sensor with a dry soft cloth.
Wipe the Cover with a dry soft cloth. Wipe off dirt with a soft cloth
slightly moistened with mild detergent solution.
Wipe the media housing with a dry soft cloth. Wipe off dirt with a soft
cloth slightly moistened with mild detergent solution.
CAUTION!
Do not use any volatile
solvents including thinner and
benzene, as this may cause
discoloration or distortion of
the cover.
Black Mark Sensor
Platen
Feed Gap Sensor
Cover Open Sensor