Toshiba B-EV4D SERIES - Manual (Page 17)

2. PRINTER SETUP ENGLISH VERSION EO1-33088
2.6 Opening/Closing the Top Cover
E2- 6
2.6 Opening/Closing the
Top Cover
When opening or closing the Top Cover, please be sure to follow the
instructions below.
To open the Top Cover:
1. Press down the Top Cover Release Button to unlock the Top Cover,
then fully open the Top Cover.
As the Top Cover is held by the damper, it does not close under its own
weight.
To close the Top Cover:
1. Press down the portions of the Top Cover indicated by the arrows
until they click into position.
WARNING!
To avoid injury, be careful
not to trap your fingers while
opening or closing the cover.
CAUTION!
1. Be careful not to touch the
Print Head Element when
opening the Top Cover.
Failure to do this may
cause missing dots by
static electricity or other
print quality problems.
2. Do not cover the Cover
Open Sensor with your
finger, hand, etc. Doing so
may cause the sensor to
wrongly detect a cover
close state.
Top Cover
Top Cover
Release Button
Top Cover
NOTE:
Be sure to close the Top Cover
completely. Failure to do this
may affect the print quality.