Making connections, Inputs, Outputs – Tascam PORTABLE CD GUITAR CD-GT1 User Manual
Page 7
TASCAM CD-GT1 —
7
Making connections
Inputs
Connecting a guitar
o connect a guitar or bass guitar to
the unit simply connect one end of the
guitar cord to the guitar and connect
the other to the
GUITAR/MIC IN
jack
of the
f you use effects pedals or stomp
boxes you can connect the output of
these to the remember that
the has its own effects
et the
GUITAR/MIC
switch to
GUITAR
ake sure the
GUITAR
power button
is pushed in
WARNING
NEVER connect a guitar amplifier to the
CD-GT1’s
GUITAR/MIC
input, as you will
damage your equipment if you do this.
Connecting a microphone
onnect a suitable microphone ask
your dealer if you are not
sure to the
GUITAR/MIC IN
jack of
the
et the
GUITAR/MIC
switch to
MIC
Connecting a stereo line source
ou can also connect a stereo line
source such as the outputs from a syn
thesizer a guitar preamplifier or rack
mount effects unit or a cassette deck
etc to the se the
LINE
IN
minijack beside the
GUITAR/MIC
IN
jack
WARNING
You should NEVER connect the speaker out-
puts of a guitar amplifier to anything except
speakers. If you are in any doubt at all about
what you can connect to your CD-GT1, ask
someone who knows.
Connecting a footswitch
ou can connect a footswitch to the
to step through the effect
slot settings or to cue the player
handsoff see later in this manual
for details
o avoid problems with your
use only a
footswitch or similar nonlatching
pushtomake footswitch connected
to the
FOOT
jack
Outputs
onnect the unit to a stereo systems
input or mixer input etc using
a suitable stereo cable not supplied
connected to the s
LINE
OUT
stereo minijack
onnect a pair of headphones not
supplied to the
PHONES
stereo mini
jack for private listening