Targus PACMB010U - Manual (Page 11)

TARGUS USB 2.0 DVD/CD-RW SLIM EXTERNAL DRIVE
Troubleshooting
To view Frequently Asked Questions (FAQ) and download driver
updates, visit our Web site at: http://www.targus.com/support.asp
Solving General Problems
If the Targus drive is not functioning:
• Verify that your system meets the hardware requirements. See
“System Requirements” on page 2.
• Check that the drive is receiving power by making sure the drive
indicator light is glowing green.
• Make sure the cable is firmly attached to the drive and that both
ends of the Y-cable are fully inserted into available USB ports on
your computer.
If there is no sound when using the Targus drive, check that:
• The disc you are using is an audio disc or supplies audio output.
• The headphones/speakers are correctly connected.
• The cable is in good condition.
• The volume is turned up.
• The audio software is installed.
Changing the Drive Letter Assignment
The following steps describe how to change the drive letter for the
Targus drive under the Windows® Me operating system.
1 Click Start, Settings, and then Control Panel.
2 Click System and select the Device Manager tab.
3 Click either DVD-ROM or Drive, then Targus drive.
10