Make the following setting – Toshiba D-R2SU User Manual
Page 22
22
Connecting to an audio system (Continued)
Connections
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this
dynamic realistic sound by connecting the recorder to a 6 channel amplifier equipped with a Dolby Digital decoder or
Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic
from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby
Surround mark.
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system
(right and left front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital
decoder”. Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic
sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
Dolby Surround Pro Logic
To audio input
Audio cable (not supplied)
To OUTPUT (L/R)
Be sure to set “Audio out select” to “Analog 2ch”
when you enjoy sounds of Dolby Surround Pro Logic
using this connection.
* Connect one or two rear speakers.
The output sound from the rear speakers will be monaural
even if you connect two rear speakers.
• Make the following setting.
On-screen display
Select:
Page
“Audio out select”
“Analog 2ch”
page 42
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
• Use DVD video discs encoded via the Dolby Digital recording system.
• Make the following setting.
On-screen display
Select:
Page
“Audio out select”
Recording system
“Bitstream”
D
page 42
page 71,
“OPERATIONS”
Optical digital cable (not supplied)
Amplifier equipped with a
Dolby Digital decoder
To OPTICAL type
digital audio input
To DIGITAL AUDIO OUTPUT
BITSTREAM/PCM
P
B
HF
VIDEO
L
R
VIDEO
R
L
R
L
VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
Y
P
R
COMPONENT OUTPUT
OUTPUT
INPUT3
INPUT1
OUT
TV)
N
M ANT.)
IR
DIGITAL AUDIO OUTPUT
BITSTREAM/PCM
OPTICAL
CHANNEL
CHANGE
P
B
F
VIDEO
L
R
VIDEO
R
L
R
L
VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
Y
P
R
COMPONENT OUTPUT
OUTPUT
INPUT3
INPUT1
UT
V)
M ANT.)
IR
DIGITAL AUDIO OUTPUT
BITSTREAM/PCM
OPTICAL
CHANNEL
CHANGE
*