Toshiba ASD-TB1-SIM9 - Manual (Page 2)

Document Number 59707-000 ASD-TB1-SIM9
ASD-TB1-SIM9 Terminals and Features
AM Terminal — Produces an output current that is proportional to the magnitude of the function
assigned to this terminal (see the Installation and Operation Manual of the ASD being used for more
information on the AM terminal settings).
AM LED Indicator — A 1-to-10 LED module that produces a real-time visual indication of the
magnitude of the function assigned to this terminal.
FM Terminal — Produces an output current that is proportional to the magnitude of the function
assigned to this terminal (see the Installation and Operation Manual of the ASD being used for more
information on the FM terminal settings).
Parameter F681 must be set to 0–10V to use the FM terminal with the ASD-TB1-SIM9.
FM LED Indicator — A 1-to-10 LED module that produces a real-time visual indication of the
magnitude of the function assigned to this terminal.
S1 – RES Switches — Multifunctional programmable switch-activated discrete inputs (qty. 8).
VI Potentiometer — Simulates the VI and the II analog input signals that are used to control the speed
or torque of the motor.
VI Terminal — Test equipment monitor for the simulated VI input signal.
RR Potentiometer — Simulates the RR analog input signal that is used to control the speed or torque of
the motor.
RR Terminal — Test equipment monitor for the simulated RR input signal.
RX Potentiometer — Simulates the RX analog input signal that is used to control the speed, torque,
and/or the direction of the motor.
RX Terminal — Test equipment monitor for the simulated RX input signal.
CN1 — Backup Control voltage input connector.
OUT1 Terminal — A discrete output terminal that may be programmed to provide an indication (open or
closed) that any 1 of the available functions of the ASD has taken place (see the Installation and Operation
Manual of the ASD being used for more information on OUT1 terminal settings).
OUT2 Terminal — A discrete output terminal that may be programmed to provide an indication (open or
closed) that any 1 of the available functions of the ASD has taken place (see the Installation and Operation
Manual of the ASD being used for more information on OUT2 terminal settings).