Telex FIREFLY P350 User Manual
Page 26
Illuminated Indicators
POWER
The
POWER
button glows red when the P350 is plugged into an AC
wall outlet and is ready to be turned on; one of the cooling fans should
be running at this time.
Keypanel
When the keypanel is lit, indicates that the P350 is in operation; the
projector lamp should also be on.
Remote Control
The RC-10 remote control can be used to remotely change all of the
keypanel and on-screen control functions. When a remote control
button is pressed, the LED on the remote control blinks rapidly.
NOTE: When the remote control operating distance becomes too short
for your purposes, install a fresh battery as described in the Remote
Control Battery section of this manual.
To use the remote control, point it at the front of the projector and press
a key, or “bounce” the IR signal off the viewing screen.
☞
User Manual 21