Tascam RC-F82 - Manual (Page 17)

TASCAM RC-F82
17
7 – Specifications
Inputs and outputs
Inputs
Analog inputs ª
LINE IN connectors
Balanced connectors: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Nominal input level: Dependent on HS-P82 settings
Maximum input level: Dependent on HS-P82 settings
Pass-through to LINE OUT 1
Pass-through to LINE OUT 2 (when TALKBACK TO LINE
OUT 2 switch OFF)
RETURN IN connectors
Balanced connectors: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 10 kΩ
Nominal input level: +4 dBu (1.23 Vrms)
Maximum input level: +24 dBu (12.28 Vrms)
PHONES IN connector
Connector: 1/4" (6.3 mm) stereo socket
Built-in mic
Omni directional, monaural
Outputs
Analog outputs ª
LINE OUT 1 connectors
Balanced connectors: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Nominal output level: Dependent on HS-P82 settings
Maximum output level: Dependent on HS-P82 settings
LINE IN pass-through output
LINE OUT 2 connectors
(When TALKBACK TO LINE OUT 2 switch is OFF)
Balanced connectors: XLR-3-32 (1: GND, 2: HOT, 3:
COLD)
Output impedance: Dependent on HS-P82 settings
Nominal output level: Dependent on HS-P82 settings
Maximum output level: Dependent on HS-P82 settings
LINE IN pass-through output
(when TALKBACK TO LINE OUT 2 switch ON)
Pseudo-balanced
Output impedance: 150Ω
Nominal output level: –8 dBu (0.3 Vrms)
Maximum output level: +8 dBu (2.0 Vrms)
Internal Microphone signal is routed to this output
PHONES connector
Connector: 1/4" (6.3 mm) stereo socket
Maximum output level: 90 mW + 90 mW
(1 kHz, THD+N 0.1%, into 32Ω)
Control input/output
MAIN UNIT connector
Connector: 6-pin mini-DIN socket
KEYBOARD connector
Connector: 6-pin mini-DIN (PS/2) socket
Other specifications
Voltage
DC 5V (supplied by the HS-P82 unit)
Power consumption
1 W or less
External dimensions
270 x 63 x 260 mm/10.63 x 2.48 x 10.24 in. (width x height
x depth, excluding protrusions)
Weight
2.5 kg/5.512 lb
Operating temperature range
0 – 40° C/32 – 104°F