Technicolor - Thomson DTH720 - Manual (Page 8)

Connections and initial set up
8
Front panel of the player
ON/STANDBY - Turns the player on or
off.The indicator is green when the player
is operating and red when the player is
turned off (stand by mode).
EJECT - To remove a disc.
STOP - Stops playing a disc.
NEXT - Plays the next chapter (DVD) or
track (CD).
PLAY/PAUSE - Plays a disc.
PREV/video - Skips back to the beginning
of the chapter (DVD) or of the track
(CD) during playback, or to the beginning
of the previous chapter or track.
Note: this key also allows the video output signal
to be adjusted (RGB, YUV, YPrPb)
depending on the television set or monitor that is
connected to your player with 3 Component
sockets or the Scart AV 1 socket. Hold down the
key for 3 seconds and then select the signal by
successively pressing the key to make a selection.
The active signal is displayed in the menu of the
player alongside the Display function. The
S-video signals (Y/C) and composite video (CVBS)
remain available on sockets 2 and 3 (see
page 6) whatever selection is made
1
2
3
4
5
6
Player display panel
2 1 3
6
4 5
DVD
VCD
: Light up according to the type of disc in the player.
CD
DivX
B : Playback in progress.
K : PAUSE mode activated.
00:00:00 : Elapsed time (hours, minutes, seconds) and chapter (DVD).
EJECT , LoaD : Information relating to loading a disc.
STOP : Disc in the player but play halted.
DVD : the INFO key on the remote control allows the elapsed time to be displayed as well as the chapter
number or current track number.
2_DTH720_en 22/06/04 11:25 Page 8