Tatung TCM-1901 - Manual (Page 15)

13
OPERATION
Operating Instructions
1. Place the monitor on a flat and firm surface (see Safety Precautions on page 2).
2. This monitor can be operated between 100VAC to 240VAC.
3. Plug the power cord into AC outlet on the wall.
4. Link the A / V terminal from your devices into the audio / video in RCA/BNC connectors
of the monitor.
5. Turn your device system power switch ON. then turn the monitor power switch ON.
The power indicator will be ON at this moment.
6. Allow about 30 seconds for the display tube to warm up, then the image should appear
on the screen.
7. The monitor will detect the frequency of the input signal automatically, and the image
may be adjusted through the function VR on front control panel.
8. Adjust the user controls to optimize picture quality.