Trion High Efficiency Console Electronic Air Purifier - Manual (Page 6)

5
Washing the Electronic
Filter
The Electronic Filter is designed
such that it can be cleaned using
common household detergent.
Using dishwashing detergent
and hot water, make a good
soaking solution in a tub or
large basin. Completely
immerse the Electronic Filter
and soak for 20 to 30 minutes in
the soaking solution (Figure 5).
After the Electronic Filter has
soaked sufficiently, agitate the
cell up and down in the soaking
solution until clean. If the
Electronic Filter is extremely
dirty, spray it with a common
household cleaner or Electronic
Air Cleaner solution. Allow the
filter to soak for five additional
minutes before proceeding with
the rinse instructions.
Thoroughly rinse both sides of
the Electronic Filter. If a sprayer
is available, spray with water
(Figure 6). Check to make sure
each plate in the Electronic Filter
is clean. Shake as much water
out of the Electronic Filter as
possible. Allow the filter to air
dry a minimum of one hour
before returning to service.
Washing Tips
When handling the Electronic Filter, be
careful not to damage or distort wires
or metal plates as this will cause exces-
sive snapping or arcing during opera-
tion.
Note: Slight discoloration of cell plates
is normal after use and does not affect
the performance of the Electronic Air
Purifier.
Figure 5
Figure 6
Warning: Do not clean
the Electronic Filter in
dishwasher.