Hardware reset, 7troubleshooting – Technicolor - Thomson TG585 v7 User Manual
Page 59
E-DOC-CTC-20080118-0003 v3.0
53
7
Troubleshooting
Hardware Reset
Proceed as follows:
1
Make sure the Thomson Gateway is turned on.
2
Use a pen or an unfolded paperclip to push the recessed Reset button. Push it until the Power LED lights
red - this will take about 7 seconds.
3
Release the Reset button.
4
The Thomson Gateway restarts.
Your system administrator may have disabled the physical reset button of the Thomson
Gateway. In this case, a hardware reset to defaults is not possible.