Transcend Information 720 User Manual

Page 36

NOTE:

The T.photo always preserves the original aspect ratio of all images based on each picture file’s orientation

information (EXIF), and NEVER stretches them to fill the entire screen. An easy, distortion-free way to

remove the black bars from the top/bottom or sides of an image is to use the Fullscreen option mentioned

above, or the Zoom function. The way photos are displayed depends on the T.photo’s orientation (see graph

below)

Detected Photo

Type (EXIF)

Horizontal Vertical

Fullscreen

Mode

T.photo
Orientation

Disabled Enabled Disabled Enabled

Landscape (A)

Portrait (B)

Restore Defaults

This function is available if you want to reset your T.photo’s settings. Note: All settings that have been

changed will return to the factory defaults.

Select Restore defaults from the Settings menu.

2. Use LEFT or RIGHT to highlight “Yes.”

3. Press

to confirm.

4. After the process is finished, the Settings menu will be displayed again.

Upgrade Firmware

Use this function to keep your T.photo up to date with the latest version from Transcend (available on the

Transcend website.

1. Insert a storage device such as a USB flash drive or SD/SDHC/MMC/MS/CF memory card that

contains a newer version of firmware.

2. Select Firmware upgrade from the Settings menu and press

to start the firmware detection

process. T.photo will automatically find the new firmware file.

3. If T.photo finds that a newer version of firmware is available, a “Yes / No” selection message will be

shown. Use LEFT or RIGHT to select “Yes” and press

to perform the system upgrade. If you

do not want to upgrade, press “No” to return to the Settings menu.