Technicolor - Thomson Thomson Life CS90 - Manual (Page 14)

10
EN
Radio
Selecting Tuner Band
1. Press TUNER•BAND•APP on the main unit or
tuner on the remote control to select TUNER.
2. Press TUNER•BAND•APP on the main unit or
band•app on the remote control to select
radio band.
Tuning to a Station
Press TUNING - or + on the main unit or
tune or to select frequencies.
Manually Setting Presets
1. Press TUNING - or + on the main unit
or tune or to access the desired
frequency.
3. Press the PROG•SET•CLEAR button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press PRESET STATION UP or DN to
select the desired preset number (1-30).
6. Press PROG•SET•CLEAR to store the selected
frequency at that preset.
Auto Preset Programming
Press and hold TUNER•BAND•APP on the main
unit or band•app on the remote control to scan
stations in selected band. A maximum of 30
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button.
Press any button to stop scanning.
Accessing Preset Stations
Press PRESET STATION UP or DN to access
the previous or next preset station. The
display first shows the preset program number
and after a few seconds, the frequency will be
displayed. (PR 01 FM is FM preset 1)
Suppressing Stereo Signal
Press on the remote control to toggle
between FM mono and stereo for stereo FM
stations. (Remote Only)
Tips:
Your audio system has 30 preset stations.
A_CS90 EN 4/28/04 9:55 AM Page 15