Settings, Display setting the clock, Setting the timer – Technicolor - Thomson Thomson Life CS90 User Manual

Page 10

Settings

Display

Setting the Clock

1. Press CLOCK•TIMER once to display clock time.
2. Press TUNING -

or +

on the main

unit or tune

or on the remote

control to set the hour and then press
PROG•SET•CLEAR to shift to minute digits.

3. Press TUNING -

or +

on the main

unit or tune

or on the

remote control to set the minute.

4. Press PROG•SET•CLEAR to save settings and

STOP to quit setting.

Setting the Timer

1. Press CLOCK•TIMER twice until the ON and

clock time is displayed ( ON - timer on time ).

2. To set timer on hour, press TUNING - or

on the main unit or press tune

on the remote control.

3. Press PROG•SET•CLEAR to shift to minute

digits.

4. Press TUNING - or +

on the main

unit or press tune

or on the

remote control to set the minutes.

5. Press PROG•SET•CLEAR for source selection.
6. To select source, press TUNING - or +

on the main unit or press tune

or on

the remote control. (CD or Tuner)

7. Press PROG•SET•CLEAR for volume

adjustment.

8. To select volume level, press TUNING -

or +

on the main unit or press tune

or on the remote control.

9. Press PROG•SET•CLEAR for timer off time

setting.

10.To set timer off time, Repeat step 2 to 4.
11.Press PROG•SET•CLEAR to save settings or

STOP to quit setting.

Activating the Timer

Press and hold CLOCK•TIMER to turn the timer
on/off. The timer icon lights on the display
when timer is activated.

Note:

• When system is ON, you can press

CLOCK•TIMER to display the current

time for about 2 seconds.

Note:

Timer can not be set or activated if clock

time is not set. SET CLK will flash on the

display when you try to activate the timer.

Follow instructions under “Setting the

Clock” to set clock.
If timer settings have not been entered,

SET TMR will flash on the display when you

try to activate the timer. Follow instruc-

tions under ”Setting the Timer” to enter

timer settings.
If timer off time is set as the same as

timer on time, TIMER NG will flash on the

display. Set the correct timer off time

again.

A_CS90 EN 4/28/04 9:55 AM Page 11