Toshiba ColorStream 27A40 - Manual (Page 16)

16
Set up
Preparation
Basic Operation
Advanced Operaion
Reference Section
Programming Channel Memory
TV
CABLE
VCR
MENU/
ENTER
CH RTN
RECALL MUTE
CH
CH
VOL VOL
1
4
7
2
5
8
3
6
9
0 ENT 100
POWER
o
REW PAUSE FF SLOW
STOP PLAY REC TV/VCR
TV/VIDEO FAV CH
A
EXIT
s / t
CHANNEL
s
/
t
T/S
MENU
CHANNEL t / s
t/s T/S MENU
3
Press T or S until the mode that corre-
sponds to your TV signal system is dis-
played in purple.
TV: TV broadcast signals.
(VHF channels 2 through 13 and UHF
channels 14 through 69)
CABLE: Cable TV signals.
(Cable channels 1 through 125)
TV/CABLE function
1
Press MENU until the Setup menu is
displayed on the screen.
2
Press s or t until “TV/CABLE” is
displayed in purple.
CH PROGRAM function
1 Press MENU until the Setup menu is
displayed on the screen.
2 Press s or t repeatedly until “CH PRO-
GRAM” is displayed in purple.
3
Press T or S to start channel programming.
The TV will automatically cycle through all
the TV or CABLE channels depending on
the mode selected, and store active channels
in the channel memory.
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
[ADD]ERASE
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
TV[CABLE]
[ADD]ERASE
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
TV[CABLE]
[ADD]ERASE
FAVORITE CH
MOVE[t s] START[T S]
CH PROGRAMMING
COMPLETED
CH PROGRAM
CABLE 24
CABLE 4
4
When channel programming is complete,
you will see the message at the right.
5 Press CHANNEL s or t to make sure the channel programming has
been done properly.
The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL ▲ or ▼ button.
First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
Channel
Number
VOLUME CHANNEL
T S t s
TV/VIDEO MENU
POWER