Toshiba SD-100X - Manual (Page 16)

16
Connections
BITSTREAM/
PCM
AC IN
L
ANALOG
R
VIDEO Y P B P R
S
AUDIO OUT
VIDEO OUT
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see 33 .
Connecting to a TV
To S VIDEO
OUT
To VIDEO
OUT To ANALOG AUDIO OUT
(red) (white) (yellow)
Signal flow
To wall outlet
To video input
(yellow) (red) (white)
To S video input
Audio/video cable (supplied)
S video cable (not supplied)
To audio inputs
If the TV has an S video input, connect the
DVD video player with an S video cable.
When using an S video cable, do not
connect the yellow video cable.
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect
to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
• Make the following setting.
On-screen display Select: Page
“Analog 2ch” “Audio Out Select”
TV or monitor with
audio/video inputs
35
39
Explanation of plug adapter (supplied):
The plug is provided with parallel type pins. However, when
using a power outlet of different type, use the plug adapter.
Plug with
parallel pins
Plug adapter