Toshiba 20A45C - Manual (Page 5)

5
FEATURES
LOCATION OF CONTROLS
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that
are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies
plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel
reception in your area or your cable system.
• On-screen 3 Language Display - This TV can display the on-screen language in English, Spanish, or French.
• Sleep Timer - Operable from the remote control, the TV can be programmed to turn off automatically (from 10 to
120 minutes, in 10-minute increments).
• Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the
TV should occur.
• Picture Control Adjustments - The on-screen display allows precise remote control adjustment of BRIGHTNESS,
CONTRAST, COLOR, TINT, and SHARPNESS.
• Closed Captioned Decoder - Displays closed captions or text on-screen (when available).
•
Stereo/SAP Reception - This TV is designed to receive stereo and second audio program (SAP) broadcasts
where available.
• Lock feature - This feature has three functions, LOCKING CHANNELS, LOCKING VIDEO INPUT, and SETTING
THE GameTimer TM .
• Programmable ON Timer - Allows you to program the TV to automatically turn on at a set time.
FRONT BACK
1. POWER Button - Press to turn the TV on or off.
2. Remote Sensor - Signals from the Remote Control
unit are received here.
3. POWER indicator - Lights up when the power is
turned on.
4. CHANNEL
▲/▼
Buttons - Press to select a higher or
lower numbered channel that was programmed into
memory.
(ENTER Button) - Press to enter or select information
for on-Screen operations.
(RESET Button) - Press, while in the on-screen menu
mode, to reset the on-screen picture adjustments to
their factory preset positions.
5. VOLUME ▲/▼ Buttons - Press to raise or lower the
level of the sound.
(MENU Buttons) - Press both VOLUME
▲/▼
buttons
at the same time to display the on-screen menu
functions.
(SET + / – Buttons) - Press to select the desired
setting during on-screen operations.
6. AUDIO/VIDEO IN (VIDEO 2) Jacks - Audio and video
signal cables from an external source can be
connected here.
7. PHONES (Earphone) Jack - Plug an earphone or
monaural headphones with a 1/8" miniplug into this
jack for private listening.
8. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
9. AUDIO/VIDEO IN (VIDEO 1) Jacks - Audio and
video signal cables from an external source can be
connected here.
10. AC Power Cord - Plug into an outlet with 120V,
60 Hz AC power only.
1 3 4 6
8
5
10 9
7 2
J3M91421A(E)_P02-07 22/03/2005, 12:52 PM 5