Toshiba GA-1120 User Manual

Page 31

INST

ALLING THE

PRINTER DRIVER

(Windo

ws)

Enter the IP address of the GA-1120/GA-1130
printer in the “Printer Name or IP Address”
field and click on [Next].

• When you use a WINS server, enter the print server

name of the GA-1120/GA-1130 printer provided from

the WINS server in the “Printer Name or IP Address”

field.

• In the “Port Name” field, the port name is

automatically entered according to the IP address or

printer name entered in the “Printer Name or IP

Address” field.

Select “Custom” and click on [Settings...].

• The Configure Standard TCP/IP Port Monitor screen

appears.

Select “LPR” at the “Protocol” option, enter a
queue name in the “Queue Name” field at the
“LPR Settings” option, and then click on [OK].

• In the “Queue Name” field, you have to enter a queue

name, direct, hold, or print, on the GA-1120/GA-1130

printer. Enter a queue depending on how you want to

print.

direct - print jobs are sent straight to the printer

without spooling.

hold - print jobs are held until users operate copying

or moving them to the Print queue with the job

management tools.

print - print jobs are spooled to the hard disk in the

GA-1120/GA-1130 printer and printed out. Use this

queue for general printing.

• You can also enable the LPR Byte Counting by

checking on “LPR Byte Counting Enabled”.