Manual channel setting, Channel search, Programme number and storing in memory – Technicolor - Thomson 14MS15UT User Manual

Page 8

Manual Channel Setting

Press the

button twice to call up the channel setting menu.

Select the broadcasting standard using the

buttons.

1. Channel Search

Select the 2nd line of the menu using the

button.

Start the search by pressing:

– the

button for a forward search,

– the

button for a backward search.

The search fully covers the VL, VH and U bands starting
from the channel on the screen. The cursor moves and
as soon as a channel is found, the picture appears on
the screen.

Wait for the menu to go to the bottom of the screen for optimum reception.

If the picture corresponds to the channel required, go to the 4th line (PR), otherwise
continue the search.

If you wish to stop the automatic search, press the

button.

2. Programme Number and Storing in Memory

Select the 4th line of the menu using the

button.

If fine tuning is necessary, see Fine Tuning

Enter a programme number using the numerical buttons of the
remote control.

You can also use the

buttons

Store the programme number you have allocated to the channel by pressing the

button.

The 2nd line of the menu is then selected again.

Restart the search using

the

buttons