Mains connection, Remote control batteries – Technicolor - Thomson 14MS15UT User Manual
Page 2
Mains connection
The TV is suitable for use on a.c. mains supply, 220-240V, 50 Hz only.
It must not be connected to d. c. mains.
The mains lead of the TV is fitted with a moulded plug. If the mains
sockets are not compatible or if for any reason the plug is
removed please follow these directions:
The moulded plug cannot be rewired and if removed must be disposed of safely.
DO NOT under any circumstances plug the severed plug into any mains socket as this could
result in electric shock.
IMPORTANT: If the plug is removed rewire new plug as follows: The wires in the mains plug are
coloured in accordance with the following code: BLUE - NEUTRAL / BROWN - LIVE.
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
- BLUE wire to the terminal coded N (Neutral) or coloured black.
- BROWN wire to the terminal coded L (Live) or coloured red.
DO NOT make any connection to the terminal in the plug which is marked by the letter E or by
the safety earth symbol
or coloured green or green and yellow.
A fused plug must be fitted with a 5A fuse approved by ASTA or BSI to BS 1362 and fuse covers
must always be securely replaced.
Remote control batteries
The remote control requires two batteries size AA as supplied with the unit.
Unclip the cover at the rear and insert the batteries the correct way round as
shown. The ends are usually market + and -.
Replace the batteries when the unit no longer operates at normal viewing distances.
When replacing batteries do not mix old and new - do not mix makes and types.
alkaline types are recommended for long life. Never risk damage to the remote
control by extreme heat - do not leave close to a radiator or on a window ledge
in direct sunshine.