Connecting external equipment – Toshiba 32BV500B User Manual

Page 8

English - 7 -

Connecting External Equipment

Before connecting any external equipment, turn off the On/Off switch and remove the mains plug from the

wall socket.

Aerial cable:...........................................................
Connect the aerial to the socket on the rear of the
television.

SCART lead:..........................................................
If you use a decoder* or a media recorder, it is essential that
the scart cable is connected to the television.
Before running fi rst time installation, any connected devices
to standy mode.
The phono sockets located on the side of the TV will accept
L and R audio signals.
The Coaxial Audio Output socket enables the connection of
a suitable surround sound system.
NOTE: This output is always active.

HDMI® (High-Defi nition Multimedia Interface) is for using
with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-defi nition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
A wide variety of external equipment can be connected to the
television; therefore, the relevant owner’s manuals for all addi-
tional equipment must be referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press SOURCE button to switch between sources.

IMPORTANT: Please do not connect a device to PC
socket while using YPbPr input.

SPDIF

SCART

VGA

Coax.OUT

HDMI

HDMI Input
Sockets

Coaxial Digital
Audio Output

PC VGA
Input

Scart
Socket

Aerial
Input

* a decoder
could be Digital
Satellite, Free to
Air or any other
compatible
decoder.

decoder*

Cable Holder Input

COMMON INTERFACE

The Common Interface is

for a Conditional Access

Module (CAM).

Component Video
Inputs (YPbPr)

USB Input

Side Video Input
PC/YPbPr/AV
Audio Inputs

Headphone

On/Off Switch

00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068433.indd 7

30.03.2011 14:31:23