Using mapsend with explorist – Thales Navigation 600 User Manual
Page 23

21
What is MapSend®?
MapSend is the Magellan line of detailed digital maps for 
Magellan hand held GPS receivers. The core MapSend product 
line includes street maps for driving, topographic maps for hiking, 
camping, and hunting, and fresh and salt water maps for fishing 
and boating. MapSend maps will transform your new eXplorist 
into an amazingly powerful solution for outdoor recreation and 
travel.
You can find out much more about the growing range of MapSend 
products through a Magellan dealer or on-line at 
www.magellangps.com under Products/Maps and Software.
Most MapSend products are provided on CD-ROM.
•
Typically cover very large areas, allowing the user to cut 
smaller regions of the big map to load to the GPS receiver.
•
Offer useful trip planning and map analysis functions, such as 
the ability to easily create and store lots of waypoints, routes, 
map regions, etc.
Some maps regions are available as pre-loaded map regions on SD 
cards.
•
Plug and play in the eXplorist, but are limited in geographic 
area.
The following sections describe how to get MapSend maps from 
CD-ROM applications compatible with your eXplorist.
Using MapSend with eXplorist
