beautypg.com

Warning, How to connect electricity, Use of adapter plugs – True Manufacturing Company Freezer / Refridgerator Swing Door T-23DT User Manual

Page 5

background image

............ www.truemfg.com ............

True Food Service Equipment, Inc.

3

3

WARNING!

SAFETY INFORMATION

The power cord of this appliance is equipped with a

grounding plug which mates with a standard grounding wall

outlet to minimize the possibility of electric shock hazard from

this appliance.
Have the wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly grounded.
If the outlet is a standard 2-prong outlet, it is your personal

responsibility and obligation to have it replaced with the

properly grounded wall outlet.
The refrigerator should always be plugged into it’s own

individual electrical circuit, which has a voltage rating that

matches the rating plate.
This provides the best performance and also prevents

overloading building wiring circuits which could cause a fire

hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord.

Always grip plug firmly and pull straight out from the outlet.
Repair or replace immediately all power cords that have

become frayed or otherwise damaged. Do not use a cord that

shows cracks or abrasion damage along its length or at either

end.
When removing the refrigerator away from the wall, be

careful not to roll over or damage the power cord.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the ground prong from the power cord.

For personal safety, this appliance must be properly grounded.

USE OF ADAPTER PLUGS

NEVER USE AN ADAPTER PLUG! Because of potential safety hazards under certain conditions,

we strongly recommend against the use of an adapter plug.

TRUE uses these types of plugs. If you do not have

the right outlet have a certified electrician install

the correct power source.

(North America Use Only!)
NEMA plugs

The incoming power source to the cabinet including any

adapters used must have the adequate power available

and must be properly grounded. Only adapters listed

with UL should be used.