Telex CDR-1000 User Manual
Page 7
Section 7 Certification
Section 8 Accessories
ACCESSORIES AND PARTS for CDR-1000
CERTIFICATIONS
(
Depending on frequency selected and country of operation
)
CDR-1000 Receiver, CSH-1000 Transmitter, CSB-1000 Transmitter
Certified to ETSI EN 300 422-2 and ETSI EN 301 489-3, Conforms to European Union directives, eligible to bear CE
marking as per the R&TTE Directive. Certified for use in Canada under RSS 123 Issue 1.
The CDR-1000 is authorized under United States Federal Communications Commission, Part 15.
The CSH-1000 and CSB-1000 are Type Accepted under United States Federal Communications Commission, Part
74.
Licensing of this equipment is the user’s responsibility and is determined by the user’s classification, the
user’s application, and frequency selected. The user should contact the appropriate telecommunications
authority for any desired clarification. Any changes or modifications made to the aforementioned
equipment, by the user, could void the user’s authority to operate the equipment.
-6-
MODEL NO.
ORDER NO.
UHF Wideband Antenna Amplifier (680-865 MHz)
UAA-500
7186400
½ Wave Flexible Rx Antenna (680-865 MHz)
FA-1
860031
Universal mounting bracket for ½ wave antennas. Includes
10 ft (3m) coax cable
AB-2
71138000
Antenna distribution system. Outputs for 4 receivers using
only 2 antennas
APD4
APD4
Broadband (450-900 Mhz) log periodic antenna with
mounting hardware. 5dB gain.
LAP500
LAP500
25-foot (7.6m) low-loss coax cable with TNC connectors
CXU-25
71151-025
50-foot (15.24m) low-loss coax cable withTNC connectors
CXU-50
71151-050
75-foot (22.9m) low-loss coax cable withTNC connectors
CXU-75
71151-075
100-foot (30.4m) low-loss coax cable withTNC connectors
CXU-100
71151-100